1608/1616: 1608/1616
|
|
1616 Telephone |
The diagram below shows the main features of a 1616 phone.

| • | The display angle can be adjusted for optimal viewing. |
| • | This phone has 16 programmable buttons. |
| • | The phone also supports up to 3 add-on BM32 button modules, each providing an addition 32 buttons. |
| • | By default the first 3 buttons are used as appearance buttons for calls you make and receive. Your system administrator can configure additional appearance buttons. |
| • | Any button not configured as appearance buttons can be configured for a range of telephone system features. These are called feature buttons. Your system administrator can do this or, for a limited number of functions, you can do this using the phones self-administration menu. |
| • | The phone includes an integral stand that can be flipped to either of two positions without needing any tools. When used in the upright position, a plastic peg in the earpiece rest area for the handset can be reversed if a more secure grip on the handset when not in use is required. |
| • | The phone includes a handsfree speaker and microphone for operation as a handsfree speakerphone. The speaker is located under the handset. The microphone is located at the bottom right of the keypad. |
| • | The phone includes a headset socket for connection of phone headsets |
| • | The phone uses a 10/100 Ethernet connection to connect to the telephone system via the IP network. |
| • | The phone includes a PC pass through 10/100 Ethernet port that can be used to also connect a computer to the network through the same connection as the phone. Use of this port can be disabled by the system administrator if not supported. |
| • | The phone may be powered from the network if Power over Ethernet (PoE) is available. Otherwise the phone needs its own power supply unit. |