IP Office Installation: Additional Processes
|
IP Office Installation: Additional Processes
|
|
IP500 Reset Button |
The IP500 control unit includes a Reset button not found on other IP Office control unit.
Pressing the button while the control unit is starting up will pause the start up until the button is released.
The effect of pressing the button during normal operation will depend on how long the button is pressed and is indicated by the CPU LED.
Press Duration (seconds) |
CPU LED |
Action |
Summary |
0 to 5. |
Off |
None |
None. |
5 to 10. |
Orange |
Reboot When Free |
Reboot when free with new incoming/outgoing call barring. A reboot using the reset button is recorded in the Audit Trail. |
10 to 30. |
Flashing orange |
Erase Configuration/ |
Erase the configuration, alarm log and audit trail. Immediate reboot without waiting for active calls to end. See Erasing the configuration for full details. |
30 to 40. |
Red |
Erase All. |
Erase configuration, alarm log and core software. See Erasing the Operational Software for full details. |
Over 40. |
Flashing green |
None |
None. |
|
© 2009 AVAYA 15-601042 Issue 20.i.- 10:12, 18 November 2009 (ip500_reset_button.htm) Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners. Last Modified: 12/09/2008 |