IP Office Installation: System Components > Physical Ports
|
IP Office Installation: System Components > Physical Ports
|
|
LAN Port |
These ports are found on IP Office control units and the WAN3 10/100 expansion module. They are used for connection to IP LAN's and IP devices. On the WAN3 10/100 module the port is used for direct connection to a control unit.
All IP Office LAN ports are 10/100Mbps auto-sensing. Operation varies as follows:
| • | IP Office 500 This unit has 2 RJ45 Ethernet ports, marked as LAN and WAN. These form a full-duplex managed layer-3 switch. Within the IP Office configuration, the physical LAN port is LAN1, the physical WAN port is LAN2. |
| • | IP460 V2 This unit has 8 RJ45 Ethernet ports marked as LAN 1 to 8. These form a full-duplex unmanaged layer-2 LAN switch. Ports are auto-MDI/MDIX. Within the IP Office configuration the physical LAN ports are LAN1. |
| • | IP412 This unit has 2 RJ45 Ethernet ports marked as LAN 1 to 2. These form a half-duplex managed layer-3 switch. Both ports are fixed MDI crossover ports. Within the IP Office configuration, physical port 1 is LAN1, physical port 2 is LAN2. |
| • | Small Office Edition This unit has 4 RJ45 Ethernet ports marked LAN 1 to 4. These form a full-duplex unmanaged layer-2 switch. An addition RJ45 Ethernet socket marked as WAN exists. With the LAN ports this acts as a managed layer-3 switch. Within the IP Office configuration, the physical LAN ports are LAN1, the physical WAN port is LAN2. |
The LAN port LED's are used as follows:
| • | Green: On = connected, Flashing = Activity. |
| • | Yellow: On = 100Mbps, Off = 10Mbps. |
LAN Cables
These are CAT5 UTP cables for connection of various IP devices within the IP Office system.
IP Office |
|
|
|||||
LAN |
Pin |
MDIX (Normal) |
MDI (Crossover) |
Wire |
Standard/ Interconnect |
Crossover |
|
|
1 |
|
|
White/Orange |
1 |
3 |
|
2 |
|
|
Orange/White |
2 |
6 |
||
3 |
|
|
White/Green |
3 |
1 |
||
4 |
Not used. |
Not used. |
Blue/White |
4 |
4 |
||
5 |
Not used. |
Not used. |
White/Blue |
5 |
5 |
||
6 |
|
|
Green/White |
6 |
2 |
||
7 |
Not used. |
Not used. |
White/Brown |
7 |
7 |
||
8 |
Not used. |
Not used. |
Brown/White |
8 |
8 |
||
| • | SAP Code: |
| • | LAN Cable - GREY: 700213481. Standard straight LAN cable. |
| • | LAN Interconnect Cable - Green: 700213465. Supplied with WAN3 modules for the direct connection of the WAN3 module to an IP Office control unit LAN port. For an IP412 control unit, this cable should be replaced with a LAN crossover cable. |
| • | LAN Crossover Cable - Black: 700213473. LAN crossover cable. |
|
© 2009 AVAYA 15-601042 Issue 20.i.- 10:13, 18 November 2009 (lanport.htm) Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners. Last Modified: 19/05/2008 |
