IP Office Installation: System Overview
|
IP Office Installation: System Overview
|
|
Wall and Rack Mounting Kits |
All the IP Office control units are designed to be free-standing. On systems with external expansion modules, the control unit and modules are intended to be stacked.
Using additional option mounting kits, some systems can be wall or rack mounted.
|
Wall Mount |
Rack Mount |
Small Office Edition |
|
|
IP400 Control Unit |
|
|
IP400 External Expansion Modules |
|
|
IP500 Control Unit |
|
|
IP500 External Expansion Modules |
|
|
Wall Mounting
The Small Office Edition control unit can be wall mounted if required. The base of the unit includes mouldings suitable for this purpose and an additional securing bracket is supplied with the unit.
The IP500 control unit can also be wall mounted if not using an external expansion units. An IP500 wall mounting kit is required in addition to suitable wall fixings.
| • | IP500 Wall Mounting Kit (SAP Code 700430150) This kit must be used when wall mounting an IP500 control unit. Additional 4.5mm fixings suitable for the wall type are required. A clearance of 500mm around the control unit is required. |
Rack Mounting
With the exception of the Small Office Edition, all IP Office control units and external expansion modules can be rack mounted into standard 19" rack systems. Each unit requires a 2U slot space within the rack. Rack mounting requires an IP400 or IP500 rack mounting kit for each control unit and external expansion module.
Where IP Office systems are being rack mounted, the effect of conditions within the rack cabinet must be considered. For example the rack temperature may be above the room temperature and airflow within the rack will be restricted. The environmental requirements for the individual IP Office units are still applicable.
| • | IP500 Rack Mounting Kit (SAP 700429202) This kit contains all the components required for the rack mounting of a single IP500 control unit or IP500 external expansion module. This includes screws for fixing of the brackets to the module, bolts for securing the module in the rack and cable tidy brackets. |
| • | IP400 Rack Mounting Kit (SAP 700210800) This kit contains all the components required for the rack mounting of a single control unit or expansion module. This includes screws for fixing of the brackets to the module and bolts for securing the module in the rack. |
| • | Barrier Box Rack Mounting Kit (SAP 700293905) Barrier boxes must be used for out-of-building analog phone extensions. This bracket allows up to 8 IP Office barrier boxes to be rack mounted and simplifies the number of connections to the protective ground point in the rack. This kit must be used when more than 3 barrier boxes are in use and supports a maximum of 16 barrier boxes for a single external expansion module. |
|
© 2009 AVAYA 15-601042 Issue 20.i.- 10:12, 18 November 2009 (rackmounting.htm) Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners. Last Modified: 12/11/2009 |
