IP Office Installation: IP500 Basic Installation
|
IP Office Installation: IP500 Basic Installation
|
|
Running the System Status Application |
In the previous process (Configuring Security Settings) the Administrator service user was configured to be able to use the IP Office System Status Application (SSA) with the control unit. This application is useful during the following installation processes as it can be used to validate the correct installation of equipment.
By default the System Status Application is enabled for the Administrator service user. For other service users, use of System Status Application must be enabled through the IP Office's security settings.
Objective - Allow SSA to be used to check the correct installation of additional equipment.
Procedure
| 1. | Select Start | Programs | IP Office | System Status. |
| 2. | On the Logon menu enter the required details. For a default systems these will be: |
| • | Control Unit IP Address: 192.168.42.1 |
| • | Services Base TCP Port: 50804 |
| • | User Name: Administrator |
| • | Password: Administrator |
| 3. | Click Logon. |
| 4. | If the details are correct, SSA should show Waiting for connection and then the IP Office system status. |
|
© 2009 AVAYA 15-601042 Issue 20.i.- 10:12, 18 November 2009 (running_system_status_application.htm) Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners. Last Modified: 02/01/2009 |