Show\Hide Navigation IP Office Installation: Planning
Up Down Back Forwards Print Synch Bookmark and Share Bookmark and Share

Tools & Parts Required

This section outlines the tools and miscellaneous parts likely to be required during the setup of an IP Office system. Other tools may also be required.

 

icon tools Tools Required

1.o Pozidrive No. 1 screwdriver for removal of module covers.
2.o Cutter for cable ties.
3.o Pozidrive No. 4 screwdriver.
4.o Wrist-strap for anti-static grounding or similar.
5.o PC running Windows XP/2003.
During the Staging Installation later in this manual, we recommend that you use a customer PC that will eventually remain on site. Ideally this will be the same PC that will be used as the customers Feature Key server and or voicemail server.
6.o Indelible marker for cable labelling.

 

icon parts Parts Required

1.o Cable ties.
2.o Cabling labels.
3.o IP Office CD Pack
Contains IP Office Administration Applications CD, IP Office User Applications CD and IP Office Engineers Toolkit CD.
4.o Technical Bulletins
Each IP Office software release is normally accompanied by a Technical Bulletin detailing special installation requirements, known issues, etc. Various software releases and their associated Technical Bulletins can also be obtained from http://support.avaya.com.

 

 

© 2009 AVAYA
15-601042 Issue 20.i.-
10:12, 18 November 2009
(tools_partsrequired.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 20/02/2009