Show\Hide Navigation IP Office Installation: IP500 Basic Installation
Up Down Back Forwards Print Synch Bookmark and Share Bookmark and Share

Wall Mounting (IP500)

ip500 wall mount

The IP500 control unit can be wall mounted. This requires an IP500 Wall Mounting Kit (SAP 700430150) plus additional 4.5mm fixtures and fittings suitable for the wall type. The wall mounting kit includes two brackets, one top and one bottom.

Environmental Requirements
In addition to the existing environmental requirements for an IP Office system, the following additional requirements apply when wall mounting a unit:

•icon_warning The wall surface must be vertical, flat and vibration free.
•icon_warning A minimum clearance of 500mm (19.7 inches) is required on all sides.
•icon_warning The unit must be orientated as shown when mounted. That is with the base card slots facing right when viewed from in front of the unit.  
•icon_warning The brackets must be used as shown, with the deeper tray-like bracket used at the bottom of the wall mounted control unit.
•icon_warning Only the screws (M3 x 6mm) provided with the mounting kit should used to attach the brackets to the control unit.

 

 

wall mount

•icon_warning The brackets must be used as shown, with the deeper tray-like bracket used at the bottom of the wall mounted control unit.
•icon_warning Only the screws (M3 x 6mm) provided with the mounting kit should used to attach the brackets to the control unit.

 

© 2009 AVAYA
15-601042 Issue 20.i.-
10:12, 18 November 2009
(wall_mounting_(ip500).htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 02/01/2009