Voicemail Ringback On

$Show\Hide Navigation$ Manager: Button Programming > Actions

Enables voicemail ringback to the user's extension. Voicemail ringback is used to call the user when they have new voicemail messages in their own mailbox or a hunt group mailbox for which they have been configured with message waiting indication.

The ringback takes place when the user's phone returns to idle after any call is ended.

•	IP Office Software Level: 1.1+.

•	Action: Advanced -> Voicemail -> Voicemail Ringback On.

•	Action Data: None.

•	Default Label: VMRB+.

•	Toggles: .

•	Status Indication: .

Status	24XX/54XX	46XX/56XX	16XX/44XX/64XX
- On.	<Label>	<Label>	Green on.
- Off.	<Label>	<Label>	Off.

•	User Admin: .

•	Phone Support Note that support for particular phone models is also dependant on the IP Office software level.

•

Analog:

•	1600 Series: [1]

•	20 Series:

•	2400 Series:

•	3600 Series:

•	3700 Series:

•

3810:

•	4400 Series:

•	5400 Series:

•	4600 Series: [1]

•	5600 Series: [1]

•	6400 Series:

•

9040:

•	T3/T3 IP Series: [2]

1.	Not 1603, 4601, 4602, 5601 and 5602 except where 4602 is supported on IP Office 2.1 and 3.0DT software.

2.	May have limited support on some specific T3 phone models if detailed below.

© 2009 AVAYA
15-601011 Issue 23.p.-
07:06, 30 October 2009
(advanced_voicemailringbackon.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 25/01/2009