Show\Hide Navigation Manager: Configuration Settings
Up Down Back Forwards Print Synch Bookmark and Share Bookmark and Share

Control Unit | Control Unit

icon large control unit

The Control Unit configuration form gives details for devices connected to the system. This includes some modules within the control unit as well as external expansion modules.

For most units, this information is allocated by the system and is not configurable.

The New and Delete actions on this form have special functions.

•New
This action is used to added a WAN3 expansion module. If when a WAN3 is added to the system, the WAN3 is not recognized following a system reboot, New on this form can be used to scan for the WAN3 module.
•Delete
This action can only be used with external expansion modules. It cannot be applied to the control unit and modules inside the control unit. The action should used with caution as deleting an expansion module will also delete any extensions or lines associated with that expansion module. If the module is physically present, those entries will be recreated following a reboot but with default settings.

 

Control Unit | Control Unit

Control Unit

SOE tick, IP403 tick, IP406 V1 tick, IP406 V2 tick, IP412 tick, IP500 tick.

Software Level

1.0+.

Mergeable

Pre-3.2 cross, 3.2+ tick.
•Device Number
This is automatically allocated by the system.
•Unit Type
The name of the device.
•Version
The version of software running on each unit.
•Serial Number
This is the number the system uses to tie a physical Control Unit to a device configuration (device number). For the control unit and WAN3 modules this is the MAC address. For a device connected to an Expansion port it is the Expansion port number plus 1.
•Unit IP Address
This field shows the IP address for the control unit (LAN1) and if present, WAN3 expansion module.
•Interconnect Number
For external expansion modules this is the control unit expansion port used for connection. For other devices this is 0.  
•Module Number
For external expansion modules this is the control unit expansion port used for connection. For internal devices in the control unit, Control Unit is displayed.

 

 

© 2009 AVAYA
15-601011 Issue 23.p.-
07:06, 30 October 2009
(config_forms_controlunitform.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 25/01/2009