Ring tones can be defined in the following terms:
| • | Distinctive Ringing - Inside, Outside and Ringback
A distinctive ring tone can be given for each of the different call types: an internal call, an external call and a ringback calls (voicemail calls, ringback when free calls, calls returning from park, hold or transfer). |
| • | The distinctive ringing patterns used for most non-analog phones are as follows: |
| • | Internal Call: Repeated single-ring. |
| • | External Call: Repeated double-ring. |
| • | Ringback Call: Repeated single-ring followed by two short rings. |
| • | For non-analog extension the ringing pattern used for each call type by the IP Office is not configurable. |
| • | Personalized Ringing
This term refers to control of the ringing sound through the individual phones. For non-analog phones, while the distinctive ringing patterns cannot be changed, the ringer sound and tone may be personalized depending on the phone's own options. Refer to the appropriate IP Office telephone user guide. |
Analog Phone Ringing Patterns
For analog phone users, the distinctive ringing pattern used for each call type can be adjusted. From the System | Telephony | Tones & Music tab, the default ring tone for each call type can be configured. The setting for an individual user associated with the analog extension can be altered from the system default through the User | Telephony | Call Settings tab.
Note that changing the pattern for users associated with fax and modem device extensions may cause those devices to not recognize and answer calls.
The selectable ringing patterns are:
| • | RingNormal
This pattern varies to match the Locale set in the System | System tab. This is the default for external calls. |
| • | RingType1: 1s ring, 2s off, etc. This is the default for internal calls. |
| • | RingType2: 0.25s ring, 0.25s off, 0.25s ring, 0.25s off, 0.25s ring, 1.75s off, etc. This is the default for ringback calls. |
| • | RingType3: 0.4s ring, 0.8s off, … |
| • | RingType4: 2s ring, 4s off, … |
| • | RingType5: 2s ring, 2s off, … |
| • | RingType6: 0.945s ring, 4.5s off, … |
| • | RingType7: 0.25s ring, 0.24 off, 0.25 ring, 2.25 off, … |
| • | RingType8: 1s ring, 3s off, … |
| • | RingType9: 1s ring, 4s off, … |
| • | RingType0: Same as RingNormal for the United Kingdom locale. |
© 2009 AVAYA
15-601011 Issue 23.p.-
07:07, 30 October 2009
(html_ring_tones.htm)
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other
trademarks are the property of their respective owners.
Last Modified: 23/01/2009
|
Manager: Telephone Features