This feature is usable within an IP Office Small Community Network. It allows a user on one system in the network to specify that the following dialing be processed by another IP Office system on the network as if the user dialed it locally on that other system. This feature is not supported for SIP extensions.
For pre-IP Office 5.0 systems, this feature requires the IP Offices to have Advanced Small Community Networking licenses.
| • | Telephone Number: The IP Address or Name of the IP Office system, using * characters in place of . characters. |
| • | Default Short Code:  |
| • | Phone Manager Control: |
| • | SoftConsole Control: |
| • | Programmable Button Control: BkOut |
| • | IP Office Software Level: 4.0+. |
Example
On a system, to break out via a system called RemoteSwitch with the IP Address 192.168.42.3, either of the following short codes could be used.
Example 1
|
Example 2
| • | Telephone Number: RemoteSwitch |
|
Example 1 allows break out using any remote switch by dialing its IP address, for example *80*192*168*42*3#. Example 2 does this for a specific remote system by dialing just *81.
© 2009 AVAYA
15-601011 Issue 23.p.-
07:06, 30 October 2009
(sc_features_break_out.htm)
Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing
by Avaya before they become applicable to any particular order or contract. The company reserves the right to
make alterations or amendments at its own discretion. The publication of information in this document does not
imply freedom from patent or any other protective rights of Avaya or others.
All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other
trademarks are the property of their respective owners.
Last Modified: 10/06/2009
|
Manager: Short Codes > Short Code Features