Phone Manager: Phone Manager
|
|
Installation Summary |
The installation process is divided into the following steps. These should be performed in the order indicated.
| 1. | ¨ System-Wide Actions The following steps should be completed before installing Phone Manager on any individual PC. |
| 1.1. | ¨ Pre-Installation Requirements Check that the pre-installation requirements for material required and PC specifications have been meet. |
| 1.2. | ¨ Planning forms Ensure the planning forms or a similar document has been completed. |
| 1.3. | ¨ Entering License Keys If any Phone Manager Pro and or Phone Manager PC Softphone users are being installed, the appropriate licenses must be installed (along with the IP Office Feature Key dongle if necessary) and checked. |
| 1.4. | ¨ User Configuration Various aspects of Phone Manager operation including the mode in which Phone Manager runs are set through the IP Office system configuration. |
| 2. | ¨ Individual PC Actions Once the above steps have been completed, installation onto individual PC's can be commenced. |
| 2.1. | ¨ Remove previous versions of the software Versions of Phone Manager prior to Phone Manager 3.2 do not support upgrading. These versions must be removed before proceeding with the installation of Phone Manager 3.2 or higher. |
| 2.2. | ¨ Install the Phone Manager software The process assumes that the user's PC is connected to the LAN and can see the IP Office. For more information, see Installing Phone Manager Software. |