For systems that automatically obtain the time from a time server, this option is available in place of the Date, Time and Time Offset functions. It allows you to check the current status of the time server and the information the system has obtained from the time server.

Time Display Format
The time format (12 or 24-hour) is controlled by the telephone system. It can be set to either 12-hour or 24-hour format for all phones by the system administrator.
1.Press the Features soft key if shown. To do this during a call, press the key phone PHONE key and then press the Features soft key.
2.Use the up arrow up and down down arrow arrow keys to highlight Phone User. Press Select.
3.Use the up arrow up and down down arrow arrow keys to highlight System Administration. Press Select. If the option is not present then you may not have been configured as a system phone user by your system administrator.
4.Enter your security PIN (login code) and press Done.
5.Use the up arrow up and down down arrow arrow keys to highlight Time Server Status. Press Select.
6.The time server information is listed. It includes the address of the time server, the current local time and the UTC time. If the phone system is configured for daylight savings then the current amount of daylight savings being applied to the local time is also shown.