The process below can be used when the telephone system does not obtain the time and date automatically. On systems that are configured to obtain the time automatically, the option for checking the Time Server Status is available instead.

1.Press the Features soft key if shown. To do this during a call, press the key phone PHONE key and then press the Features soft key.
2.Use the up arrow up and down down arrow arrow keys to highlight Phone User. Press Select.
3.Use the up arrow up and down down arrow arrow keys to highlight System Administration. Press Select. If the option is not present then you may not have been configured as a system phone user by your system administrator.
4.Enter your security PIN (login code) and press Done.
5.Use the up arrow up and down down arrow arrow keys to highlight Date. Press Select.
6.The current date being used by the telephone system is displayed.
7.Enter the required date, using the either the * or # keys to enter the / separators. To delete the previous digit or character entered press Bksp.
8.When a complete valid date has been entered, the display will confirm that by showing the full date and the Set soft key option.
9.To set the date as the new date to be used by the telephone system press Set.