Being able to check and report the system name, software version and IP address may be useful when reporting any potential problems to the system maintainer.

System Phone User

This method can be used if you have been configured as a system phone user by your system administrator.

1.Press the Features soft key if shown. To do this during a call, press the key phone PHONE key and then press the Features soft key.
2.Use the up arrow up and down down arrow arrow keys to highlight Phone User. Press Select.
3.Use the up arrow up and down down arrow arrow keys to highlight System Administration. Press Select.
!Note: This option is only present if you have been configured as a system phone user by your system administrator.
4.Enter your security PIN (login code) and press Done.
5.Use the up arrow up and down down arrow arrow keys to highlight System Information. Press Select.
6.The system displays the following information about itself:
The system type and the level of software it is running.
The IP addresses of the two network interfaces.
The serial number of the license key.

Logout Method

This method of displaying system information is supported for users who have a login code. It requires the phone to have physical (for example not touch screen) programmable buttons.

1.Log out from the phone.
2.Check that the phone displays NOT LOGGED IN. If the system automatically logs in another user, they need to log out.
3.Press any unused (unlabelled) programmable buttons. The screen displays basic information about the IP Office system.
4.Press Exit to return to the normal display for a phone with no logged in user.